检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:高俊尧[1,2] 储飞黄[1] 黄美荣[3,4] 崔永辉[4]
机构地区:[1]电子工程学院 [2]66393部队博士后科研工作站 [3]空军预警学院 [4]国防信息学院
出 处:《空军预警学院学报》2014年第5期323-327,共5页Journal of Air Force Early Warning Academy
摘 要:针对大带宽条件下传统雷达信号环境模拟实时计算结构实现困难和任意波形发生(AWG)实现方式模拟时间有限的问题,提出了一种基于触发序列的实现方法.通过触发序列的计数,生成信号波形输出的触发脉冲,然后通过后级的幅相矫正,实现超宽带雷达信号环境的有效模拟.最后利用高性能信号处理平台SDR14实现了模拟器的开发.实测结果表明,该模拟器可实现最大带宽600MHz的雷达信号模拟.Considering a few problems that the implementation of analog real-time computationconfiguration of traditional radar signal environment is thorny and the analog time of arbitrary waveformgeneration (AWG) implementation modes is limited in the case of large bandwidth, this paper puts forward animplementation based on triggering sequence. By counting the triggering the sequence, the triggering pulsesoutput by generated signal waveform can be corrected through phase-amplitude in the following stage, thusimplementing the effective analog under the environment of ultra wideband (UWB) radar signals. And finally, byusing SDR14, a high performance signal processing platform, the development of simulator is implemented. Bythe real measured results, it is shown that this simulator can be used for simulation of radar signals with maximumbandwidth 600 MHz.
关 键 词:序列计数触发 超宽带雷达 任意波形发生 雷达信号环境模拟 SDR14硬件平台
分 类 号:TN955[电子电信—信号与信息处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117