检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]Department of Civil Engineering, Military Technical College [2]College of Aerospace and Civil Engineering, Harbin Engineering University
出 处:《Applied Mathematics and Mechanics(English Edition)》2014年第10期1261-1270,共10页应用数学和力学(英文版)
基 金:supported by the National Natural Science Foundation of China(No.51108113)
摘 要:The present paper is exposed theoretically to the influence on the dynamic stress intensity factor (DSIF) in the piezoelectric bi-materials model with two symmet- rically permeable interracial cracks near the edges of a circular cavity, subjected to the dynamic incident anti-plane shearing wave (SH-wave). An available theoretical method to dynamic analysis in the related research field is provided. The formulations are based on Green's function method. The DSIFs at the inner and outer tips of the left crack are obtained by solving the boundary value problems with the conjunction and crack- simulation technique. The numerical results are obtained by the FORTRAN language program and plotted to show the influence of the variations of the physical parameters, the structural geometry, and the wave frequencies of incident wave on the dimensionless DSIFs. Comparisons with previous work and between the inner and outer tips are con- cluded.The present paper is exposed theoretically to the influence on the dynamic stress intensity factor (DSIF) in the piezoelectric bi-materials model with two symmet- rically permeable interracial cracks near the edges of a circular cavity, subjected to the dynamic incident anti-plane shearing wave (SH-wave). An available theoretical method to dynamic analysis in the related research field is provided. The formulations are based on Green's function method. The DSIFs at the inner and outer tips of the left crack are obtained by solving the boundary value problems with the conjunction and crack- simulation technique. The numerical results are obtained by the FORTRAN language program and plotted to show the influence of the variations of the physical parameters, the structural geometry, and the wave frequencies of incident wave on the dimensionless DSIFs. Comparisons with previous work and between the inner and outer tips are con- cluded.
关 键 词:symmetrically interfacial crack piezoelectric bi-material Green's function dynamic stress intensity factor (DSIF) dynamic anti-plane shearing wave (SH-wave)
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222