检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]天津科技大学,天津300457
出 处:《皮革科学与工程》2014年第5期10-15,21,共7页Leather Science and Engineering
基 金:中国轻工集团科技创新基金
摘 要:以丙烯酸类单体和废革屑中提取的胶原蛋白为原料,以过硫酸钾(KPS)为引发剂,选用阴离子和非离子乳化剂进行复配作为乳化剂,通过种子乳液聚合方法合成胶黏剂,采用FTIR、TG等测试技术进行表征,考察单体的配比、加料方式、复配乳化剂用量、反应温度、反应时间等因素对乳液性能和胶膜性能的影响。研究结果发现,最佳反应条件为:采用半连续种子乳液聚合法,软硬单体配比为9∶1、乳化剂用量为2%、反应温度为85℃,反应时间为5-6 h。Adhesives wassynthesized by the semi-continuous seed emulsion polymerization, using acrylic monomer and- collagenextracted from leather waste as raw material, potassium persulfate (KPS) as initiator, anionic and non-ionic emul- sifiers as an emulsifier. The products characterized by FTIR, TG.The effect of monomer ratio, feeding methods,amountof emulsifier, reaction temperatureand time on the properties of emulsion and film. The results showed that: when the mass proportion of soft'and hard monomer at 9:1, emulsifier at 2%, the reaction temperature at 85 ℃ and the reaction time at 5-6 h, thecomprehensive performance of the emulsion and film are best.
分 类 号:TS59[轻工技术与工程—皮革化学与工程] TQ430.6[化学工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.115