推拉式酸洗机组圆盘剪处带钢跑偏分析及对策  

Analysis & Solution for Strip Running-off near Disc Shear in Push-Pull Type Pickling Lines

作　　者：邓伟 刘会然 

机构地区：[1]一重集团大连国际科技贸易有限公司,助理工程师辽宁大连116113 [2]一重集团大连设计研究院有限公司,助理工程师辽宁大连116600

出　　处：《一重技术》2014年第4期45-48,共4页CFHI Technology

摘　　要：推拉式酸洗机组现场调试中发现,带钢在圆盘剪处严重跑偏导致无法剪切。通过对跑偏的影响因素进行分析,找到关键原因并采取相应对策,彻底解决跑偏问题。A serious strip running-off problem near the disc shear is found during the commissioning of a push-pull type pickling line at site, which leads to the failure of the shear in cutting. The factors of the strip running-off is studied to find out the key reason. So, the countermeasure is adopted to solve this running-off problem completely.

关 键 词：推拉式酸洗机组 圆盘剪 带钢跑偏 

分 类 号：TG333.72[金属学及工艺—金属压力加工]