SHTRM多路铂电阻温度远传监测仪的设计  

Design of Temperature's Long-distance Transmitting Monitor with SHTRM Multi-channel Platinum Resistor

作　　者：张春光[1] 王长友[1] 张丽芳[1] 

机构地区：[1]大连交通大学电气信息学院,辽宁大连116028

出　　处：《化工自动化及仪表》2014年第4期372-376,共5页Control and Instruments in Chemical Industry

基　　金：辽宁省教育厅科学研究一般项目(L2013174)

摘　　要：设计了一个四路铂电阻温度远传监测仪,它最多可对四路温度信号同时进行检测,将温度最高的一路信号在现场自动显示、上限报警输出,同时将显示的这路信号以两线制方式变送为4～20mA电流信号远传至计算机监控系统.还详细介绍了在0～150℃范围内的最佳线性化参数和最大非线性化误差的计算方法.给出了具有三线制导线电阻补偿功能的仪表完整的设计原理图、设计思路和参数计算方法.The monitor with platinum resistor was designed to monitor four-way temperature signals simultaneously,and to display the signal of the highest temperature in situ and to output the upper limit,as well as to convert the highest signal into a 4 ～20mA（DC） signal and then has it transmitted to the computer monitoring system.Both optimum linear parameters at 0 to 150℃ and the method to calculate the maximum nonlinear error were introduced,including the schematic diagram,design idea and the parameter calculation method for the instrument with three-wire conductor resistance compensation.This design has high reference and application value because of the simple and compact structure,convenient debugging,high linearization accuracy,low design cost and less maintenance.

关 键 词：多路温度变送器 铂热电阻 线性化补偿 三线制 

分 类 号：TH811.1[机械工程—仪器科学与技术]