基于铸辗复合成形的铸态42CrMo钢热物理性能参数的研究  

Study on the Thermal-physical Characteristic Parameters of Casting 42CrMo Based on Cast-rolling Forming Technology

作　　者：李永堂[1] 杨卿[1] 齐会萍[1] 巨丽[1] 华林[2] 郭良刚[3] 

机构地区：[1]太原科技大学材料科学与工程学院,太原030024 [2]武汉理工大学汽车工程学院,武汉430070 [3]西北工业大学材料学院,西安710072

出　　处：《机械工程学报》2014年第16期77-82,共6页Journal of Mechanical Engineering

基　　金：国家自然科学基金重点(51135007);国家自然科学基金(51174140;51075290);高等学校博士点基金优先发展计划(20111415130001);山西省归国留学人员基金(2011-084)资助项目

摘　　要：铸辗复合成形工艺是生产环形零件的先进成形技术,具有高效短流程、节能节材和减少排放等显著优点。对铸态环坯材料在成形工艺条件下的组织演变机理和变形热力学条件进行深入的研究,对于实现材料在这种短流程中的组织改善和成形成性一体化调控,具有重要意义。分析研究材料在热变形条件下热物理性能参数和建立准确的材料模型,是分析研究材料热成形过程组织演变和实现成形成性一体化调控的前提和关键。针对轴承套圈铸辗复合成形工艺,以42CrMo钢为研究对象,通过数值模拟和试验研究,得到热变性条件下铸态42CrMo钢的热物性参数如热导率、比热容和热扩散系数及其变化规律,分析影响这些热物性参数变化的因素,可为分析42CrMo环件铸辗复合成形工艺和实现成形过程中组织和性能的改善提供准确的数据和模型。Cast-rolling forming technology is a new technology to produce ring parts. It possesses many advantages such as high efficiency, short process, saving energy and materials and reducing pollution. In order to get better microstructure and mechanical properties in this new process it is very important to study the microstructure evolution mechanism and deformation thermodynamic conditions of casting materials. To investigate thermal-physical characteristics of materials under hot forming and establish accurate model is key and premise for analyzing microstructure evolution of materials and realizing the controlling of organization and mechanical properties. Aiming at the cast-rolling forming technology of bearing rings, the thermal-physical characteristics of casting 42CrMo such as thermal conductivity, specific heat and thermal diffusivity under hot forming are researched by means of numerical simulation and experiments. The variations with temperature of these parameters are achieved. The factors influencing the changes of these parameters are analyzed. The obtained results can provide accurate data and model for analyzing cast-rolling forming technology of 42CrMo steel rings and getting better microstructure and mechanical properties.

关 键 词：环形零件 铸辗复合成形 铸态42CrMo钢 热物性参数 

分 类 号：TG113[金属学及工艺—物理冶金]