300 MW级火力发电机组循环冷却水阻垢缓蚀剂性能研究  

Study on the capacities of scale & corrosion inhibitors used for the circulating cooling water in 300 MW thermal power generating units

作　　者：李进[1] 黄忠源[1] 张万友[2] 沈兴磊 

机构地区：[1]北京交通大学土木建筑工程学院,北京100044 [2]东北电力大学化学工程学院,吉林132012 [3]北京京能未来燃气热电有限公司,北京102209

出　　处：《工业水处理》2014年第10期17-21,共5页Industrial Water Treatment

基　　金：国家自然科学基金项目(51278035);河北大唐张家口发电有限公司项目(LCL12088530)

摘　　要：以华北地区某电厂的循环冷却水系统补充水为试验介质,以其凝汽器使用的HSn70-1A、HSn70-1B、BFe30_1_1 3种铜合金为试验对象,采用循环冷却水动态模拟、电化学阻抗谱(EIS)测试、电子显微镜(SEM)观察及金属表面元素分析(EDS法)的方法对2种药剂(A、B)的阻垢缓蚀性能进行了研究。结果表明:现场循环冷却水浓缩倍率维持4倍时,2种药剂均可保障机组安全运行,其中药剂B的缓蚀效果较好。The make-up water for the circulating cooling water system of a power plant in North China is taken as the test medium,and three kinds of copper alloy HSn70-1A,HSn70-1B,BFe30_1_1 used in the condenser are taken as the test object,dynamic simulation,electrochemical impedance spectroscopy （EIS） tests,scanning of electron microscopy （SEM）,and the metal surface element analysis（EDS methods） have been used for evaluating the scale inhibition capacity and corrosion inhibition capacity of the two agents（A and B）. The results show that both kinds of agents A and B can ensure the save operation of the unit assembly ,when the circulating cooling water concentration ratio keeps at 4 times,but agent B has better corrosion inhibition effectiveness.

关 键 词：循环冷却水 铜合金 阻垢缓蚀剂 电化学方法 

分 类 号：TQ085.412[化学工程]