一种聚合物分散液晶菲涅尔波带片  

A Polymer Dispersed Liquid Crystal Fresnel Zone Plate

作　　者：何如双[1] 张斌[1] 王振宇[1] 陶卫东[1] 潘雪丰[1] 董建峰[2] 

机构地区：[1]宁波大学理学院微电子科学与工程系和光学研究所,浙江宁波315211 [2]宁波大学信息科学与工程学院,浙江宁波315211

出　　处：《光子学报》2014年第9期181-184,共4页Acta Photonica Sinica

基　　金：国家自然科学基金(No.61078060)资助

摘　　要：利用波长为800nm,脉宽130fs的飞秒激光在镀铝膜的玻璃基片上刻蚀出波带环图案,然后用溶致相分离法将其制备成聚合物分散液晶菲涅尔波带片.用波长为632nm的He-Ne激光对聚合物分散液晶菲涅尔波带片进行测试,结果表明:随着电压的增加该样品具有良好的光电可控性,可以实现对焦点光强的调控.在沿光轴方向上,测试到的主焦点位置与理论计算值相差小于5%,且聚合物分散液晶菲涅尔波带片在160V电压时衍射效率为10.4%,接近理论衍射效率12.1%,表明了该设计的可行性.A wave band ring pattern was fabricated by femtosecond laser on a glass substrate which was plated with aluminum,the wavelength of the laser was 800 nm,and the width of pulse was 130 fs.The solvent system phase separation preparation was used to manufacture a polymer dispersed liquid crystal Fresnel zone plate.By the He-Ne laser,the properties of the zone plate was tested.The results show that the sample has good photoelectric regulation properties with the increasing voltage,the intensity of the focal point is able to be adjusted.Meanwhile,along the direction of optical axis,the difference between the location of the main focal point and its theoretical value is less than 5%,and the diffraction efficiency of the polymer dispersed liquid crystal Fresnel zone plate is 10.4% with the voltage is 160 V,which is close to the theoretical value of 12.1%.The results prove this design to be feasible.

关 键 词：波带片 液晶 光电可控 理论值 激光加工 

分 类 号：O439[机械工程—光学工程]