应用于直线型吸烟机的卷烟热塌陷测量装置设计  

Design of Cigarette Hot Collapse Measuring Device for Linear Smoking Machine

作　　者：李文伟[1] 王玉芳[1] 赵海娟[1] 韩明[1] 牛芳芳[2] 朱震[2] 

机构地区：[1]河南中烟工业有限责任公司安阳卷烟厂 [2]中国科学院合肥物质科学研究院,合肥市蜀山湖路350号230031

出　　处：《烟草科技》2014年第10期28-31,共4页Tobacco Science & Technology

摘　　要：为提高卷烟热塌陷检测效率,扩展直线型吸烟机的功能,设计了一种应用于直线型吸烟机的卷烟热塌陷测量装置。该装置主要由人机交互单元、采集控制单元及多个测量单元组成,配合直线型吸烟机的机械结构及运行过程,利用高精度位移传感器和红外温度传感器作为测量和定位器件,在卷烟抽吸过程中实时测量卷烟的热塌陷值。采用多层总线式控制系统,实现了多支卷烟的同时测量。结果表明,试验样本滤嘴和烟支部分P值均小于0.05,分组合并标准偏差均小于0.10,符合YC/T 354—2010测试要求。该装置实现了对卷烟热塌陷指标的测量,具有良好的稳定性、一致性和准确性,可同时测量多支卷烟的热塌陷,有效提高了测量效率。In order to improve the efficiency of cigarette hot collapse detection and extend the function of linear smoking machine, a cigarette hot collapse measuring device connected to linear smoking machine was designed. The device was mainly composed of a man-machine interface, an acquisition control unit and several measurement units. By cooperating with the mechanical structure and running process of linear smoking machine and using high precision displacement sensors and infrared temperature sensors, the device could real-timely measure the value of cigarette hot collapse during smoking. The multiple-cigarette measurement was realized via a multi-layer bus control system. The results showed that the P values of filter and tobacco rod of all cigarette samples were less than 0.05 and the combined standard deviations of each sample group less than 0.10, which met the testing requirements of industrial standard, YC/T 354-2010. The device featured good stability, consistency and accuracy, and could measure the hot collapse of several cigarettes simultaneously.

关 键 词：卷烟 热塌陷 直线型吸烟机 位移传感器 温度传感器 

分 类 号：TS439.1[农业科学—烟草工业]