检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]贵州大学材料与冶金学院,贵州贵阳550025 [2]贵州省材料结构与强度重点实验室,贵州贵阳550025
出 处:《贵州工业职业技术学院学报》2014年第3期3-6,共4页GUIZHOU SCIENCE AND TECHNOLOGY PROFESSIONAL COLLEGE
基 金:国家科技支撑计划(2007BAE16802);贵州省科技厅重大专项计划项目(黔科合重大专项字(2008)6005号).
摘 要:本文采用不同的风冷频率对奥氏体化后的钢丝进行冷却处理,研究不同的冷却速度对钢丝组织和性能的影响。结果表明:随着风冷频率的增大,钢丝的强度和断面收缩率增大,原因是冷速增大时,珠光体的片层间距和团尺寸均减小;而延伸率降低,是由钢丝由表及里冷速不同,从而导致片层组织不均匀引起。Using different air - cooled frequency to cool the steel wire with austenitized, research the the influence of different cooling rate on microstructure and properties of steel wire. The results show that strength and reduction of area of the steel wire increase as the air - cooled frequency increase. This is because the'lamellar spacing and colony size of pearlite decrease while the cooling rate increasing. While the lamellar spacing uneven as the cooling speed of steel wire is different from outside to inside, the elongation decreased.
分 类 号:TG113.26[金属学及工艺—物理冶金]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.15.228.200