检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:马岩[1] 张望[1] 黄胜[1] 吴诗勇[1] 吴幼青[1] 高晋生[1]
机构地区:[1]华东理工大学资源与环境工程学院,煤气化及能源化工教育部重点实验室,上海200237
出 处:《华东理工大学学报(自然科学版)》2014年第5期568-572,共5页Journal of East China University of Science and Technology
基 金:国家重点基础研究发展(973)计划(2012CB214903)
摘 要:以3种高硫煤为对象,考察了反应温度、反应时间、Fe2(SO4)3溶液浓度和原煤粒度等因素对Fe2(SO4)3溶液热处理脱硫效果的影响,并对脱硫前后原煤理化性质的变化进行了研究。结果表明:在Fe2(SO4)3溶液浓度为1mol/L,反应温度为90℃,反应时间为4h,煤粒度小于0.096mm的条件下,原煤中黄铁矿硫的脱除率高达67%,而煤中的有机硫含量并无明显的变化;升高反应温度,增加Fe2(SO4)3溶液浓度,延长反应时间以及减小原煤粒径均可在一定程度上提高原煤的黄铁矿硫和全硫的脱硫率;经Fe2(SO4)3溶液处理后原煤的黏结性均出现了不同程度的下降,其中新峪煤完全失去了黏结性;Fe2(SO4)3溶液脱除原煤中无机硫主要是通过Fe3+的强氧化性将黄铁矿硫氧化为SO2-4进而脱除。Effects of reaction temperature, processing time, Fe2(SO4)3 concentration and the particle size of coal on desulfurization of three kinds of high-sulfur coals through heat treatment of Fe2 (SO4)3 solution were investigated. The change of coal physicochemical property before and after the treatment was studied. The results showed that the highest removal of pyrite sulfur reached 67% while no significant change in the organic sulfur was observed when the concentration of Fe2(SO4)3 was 1 mol/L, the reaction temperature was 90 ℃, and the particle size of coal was less than 0. 096 mm. The removal rate of total sulfur and pyritic sulfur increased upon increasing the reaction temperature, the concentration of Fe2(SO4)3, and the reaction time but decreasing the particle size of coal. The caking index of coal decreased at different degrees after the treatment, especially for Xinyu coal who lost the caking property totally. The inorganic sulfur was oxided into SO4^2- and removed due to the strong oxidability of Fe3+.
分 类 号:TQ536.1[化学工程—煤化学工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145