水下连接器液压管线排布设计  

Design of Arrangement of Hydraulic Pipelines on Underwater Connector

作　　者：任必为[1] 王金龙[2] 姜宇飞[2] 赵宏林[2] 段梦兰[2] 

机构地区：[1]北京矿冶研究总院,北京102600 [2]中国石油大学(北京)海洋油气研究中心,北京102249

出　　处：《石油矿场机械》2014年第11期23-28,共6页Oil Field Equipment

基　　金：国家科技重大专项"水下管汇连接器样机研制"(2011ZX05026-003-02);国家科技重大专项"深水水下生产设施制造;测试装备及技术"(2011ZX05027-004)

摘　　要：为保证水下连接器液压系统能够正常工作,完成海底管道连接的任务,需选取合适的液压管线组合将液压执行元件和液压控制元件有效地连接起来。为了最大程度降低排布在安装工具上液压管线的复杂程度,并有效降低碰撞对液压管线造成损伤的可能性,设计了硬管和软管配合使用的排布方式,并采取设置护板、中空部件内部走线、绕后处理等方式来降低液压管线的暴露程度。利用三维布管软件Routing对水下连接器的液压管线进行了建模,证明了所设计的液压管线排布方式的可行性。In order to guarantee the normal work of the hydraulic system in underwater connector,so as to complete the task of connecting submarine pipelines,choosing suitable hydraulic pipelines to connect the hydraulic actuators and the hydraulic valves effectively is important.In order to maximize reducing the complexity of the hydraulic pipelines that was assembled on the running tool,and reduce the possibility of collision damage of hydraulic pipelines effectively,the design of hard tube and hose is needed,and taking the guard plate,walking lines inside hollow parts,the post-wrapping methods are needed to reduce the exposure of hydraulic pipelines.Use three-dimensional pipe ranking software ＂Routing＂modeling the underwater connector hydraulic pipes to prove the feasibility of this design.

关 键 词：水下连接器 液压硬管和软管 排布管线 ROUTING 

分 类 号：TE952[石油与天然气工程—石油机械设备]