稀土镁合金的摩擦磨损性能  

Friction and Wear Properties of Rare Earth Magnesium Alloys

作　　者：尹鹏跃 曹丽杰[1] 张嘉璐 

机构地区：[1]上海工程技术大学机械工程学院,上海201620

出　　处：《上海工程技术大学学报》2014年第3期241-243,共3页Journal of Shanghai University of Engineering Science

基　　金：上海市大学生创新训练计划资助项目(CS1301006);上海工程技术大学大学生创新活动计划资助项目(CX1301013)

摘　　要：采用MMS-2A型环块式摩擦磨损试验机对稀土镁合金GW103K进行了摩擦磨损试验.试验结果表明：GW103K体积磨损量随着磨损时间和外载荷的增大而增大,当磨损时间超过30 min,外载荷超过400 N时,体积磨损量增大明显;摩擦因数在0.26～0.28之间变化.对摩擦副环块,转速与体积磨损量成正比,与摩擦因数成反比.The friction and wear experiment of rare earth magnesium alloy GW103K was performed by a MMS-2A type ring block friction wear tester. The experimental results show that the abrasive volume of the alloy increases with the increasing of wear time and external load, and it increases evidently when the wear time exceeding 30 min and the external load going beyond 400 N. The friction coefficient of the alloy is changing between 0.26 and 0.28. The higher the rotating speed of the counterpart ring-block, the greater the wear volume loss of the alloy and the smaller the friction coefficient.

关 键 词：稀土镁合金 摩擦 磨损 

分 类 号：TG146[一般工业技术—材料科学与工程]