三维薄膜型FLNG储舱晃荡载荷的数值仿真  

Numerical simulation on sloshing load in 3D membrane floating liquefied natural gas tank

作　　者：朱小龙[1] 阮诗伦[1] 陈世文[1] 

机构地区：[1]大连理工大学工程力学系,大连116024

出　　处：《计算机辅助工程》2014年第5期44-48,共5页Computer Aided Engineering

基　　金：国家科技重大专项子课题(2011ZX05026-006-06)

摘　　要：针对浮式液化天然气（Floating Liquefied Natural Gas,FLNG）船大型储舱内的液体晃荡问题,分别以薄膜型储舱的1∶20模型及原型为研究对象,采用CFD仿真方法分析百年一遇生存海况下液舱内晃荡载荷的基本规律和危险工况.结果表明：在真实海况下,现有FLNG储舱设计中的晃荡冲击载荷主要来源于船体纵向运动,可能出现的最大冲击载荷约为0.4 MPa,主要发生在纵舱壁与横向隔水舱的拐角位置,危险载液率为20%～30%及90%.As to the issue of liquid sloshing in the large tank of Floating Liquefied Natural Gas（ FLNG）ship,the numerical models for 1 ∶ 20 model and prototype of a membrane tank are taken as the research objects,and the CFD simulation method is used to analyze the sloshing load and dangerous conditions in liquid tank under the survival sea condition in a-hundred-year return period. The results indicate that,the impact load of sloshing in the current FLNG tank design is ascribed to the longitudinal motion of ship body,the possible maximum impact load is 0. 4 MPa,the maximum impact load mainly occurs on the corners of the longitudinal wall and the horizontal bulkhead,and the risky filling rate is 20% ～ 30% and90%.

关 键 词：浮式液化天然气船 储舱 晃荡 危险载液率 CFD 

分 类 号：TE975[石油与天然气工程—石油机械设备]