琴弓的自动生产系统  

Automatic Production System of the Bow

作　　者：彭芳[1] 王佳庆[1] 刘俊[1] 

机构地区：[1]苏州工业园区职业技术学院机电工程系,江苏苏州215123

出　　处：《机电工程技术》2014年第11期89-92,共4页Mechanical & Electrical Engineering Technology

基　　金：江苏省高级访问工程师项目(编号:2013FG053)

摘　　要：琴弓是弦乐器的一部分,用来令琴弦振动发出声音。目前琴弓主要以半手工半机械的生产方式来生产。若以自动化生产系统来代替手工制作将会大大降低生产成本,提高生产效率,并且有效地减少仓库材料的积压,降低生产损耗。对琴弓的自动化生产系统进行了完整的设计,对控制系统的硬件结构和传动控制方案进行了研究,利用顺序编程实现琴弓自动化生产系统的控制要求。最后完成了整个输送及生产部分的任务。The bow is a part of the stringed instrument, which is used to make the string vibrate to produce the sound. At present, the bow is made mainly in the way of half manual and half mechanical production. If using the automatic production system to replace handmade, it will reduce the cost remarkably and improve production efficiency. At the same time it will reduce the backlog of warehouse material and the production waste. In this paper, it introduces the bow＇ s automatic manufacturing system, and researches on the hardware structure and control scheme of the system, meets the requirements for the blow automatic manufacturing system through sequential programming technology, fulfils all the tasks of transportation and production.

关 键 词：琴弓 自动生产系统 PLC 

分 类 号：TP29[自动化与计算机技术—检测技术与自动化装置]