检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘连生[1,2] 梁龙华[1,2] 吴吉洋 焦永斌[1,2] 陆哲祥[1,2]
机构地区:[1]江西理工大学资源与环境工程学院,江西赣州341000 [2]江西省矿业工程重点实验室,江西赣州341000 [3]江西漂塘钨业有限公司,江西赣州341515
出 处:《中国工程科学》2014年第11期107-112,共6页Strategic Study of CAE
基 金:中国有色金属工业协会与中国工程爆破协会联合资助重大科研专项(CSEBKY20100001);江西省科技计划项目(20142BBE50008)
摘 要:应用瞬变电磁法对硐室爆破盲炮的检测与识别进行了可行性研究。试验时先确立电磁背景场,然后在硐室中预置良性导体并测得电磁场后消除背景场,在爆破后再次进行瞬变电磁测量。通过对比爆破前后预置良性导体涡流场的变化,实现硐室爆破盲炮检测与识别的目的。试验结果表明,当铝箱目标体埋深不超过30 m时,瞬变电磁检测法可以明确地确定铝箱的位置;当铝箱埋深超过30 m后,铝箱形成的二次涡流场层次不明,不能确定铝箱的埋深与位置。In this paper,transient electromagnetic method was used to carry out the feasibili-ty study on the detection and recognition of chamber blasting misfire. First,an electromagnetic background field was established in the test;second,a benign conductor was preset in the chamber,and then the background field was eliminated after the electromagnetic field was mea-sured;finally,the transient electromagnetic field was measured again after blasting;at last, the chamber blasting misfire was detected and recognized by comparing the change of vortex field of the preset benign conductor before and after blasting. The test results showed that:When the buried depth of aluminum box target was no more than 30 m,transient electromag-netic method can clearly identify the position of the aluminum box;when the buried depth of aluminum box was more than 30 m,the buried depth and position of the aluminum box was not sure due to the unknown level of secondary vortex field generated by aluminum box.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.224.93.225