基于ANSYS Workbench的15000kN液压剪板机机体结构设计  

Structural design of 1500T hydraulic shear Based on ANSYS Workbench

作　　者：魏周玲 傅波[1] 卫平 

机构地区：[1]四川大学制造科学与工程学院,四川成都610065 [2]成都莱克冶金机械设备制造有限公司,四川成都610041

出　　处：《锻压装备与制造技术》2014年第5期26-28,共3页China Metalforming Equipment & Manufacturing Technology

摘　　要：针对15000k N工作压力要求设计了液压式剪板机的机体结构,利用Solid Works软件建立了由上横梁、下横梁和立柱构成的机体模型,通过ANSYS Workbench软件的静力学分析模块建立有限元分析模型,校核了整个机体的强度和刚度,并对机体结构进行了优化和改进,使设计结构达到了工作要求。The body structure of hydraulic shear has been designed aiming at the requirement of 1500T working pressure. The body model which consists of upper beam, lower beam, and column has been established by use of Solid Works software. The finite element analysis model has been built by tile statics module of ANSYS Workbench software. The strength and rigidity of the body have been checked. The structure has been optimized and improved, which satisfies the working requirement.

关 键 词：机械设计 液压剪板机 机体结构 有限元 结构改进 

分 类 号：TG333.21[金属学及工艺—金属压力加工]