控制棒驱动机构轴向传热特性试验和理论分析  

Experimental and Theoretical Analysis on Axial Heat Transfer Characteristics of CRDM

作　　者：张升[1] 顾汉洋[1] 

机构地区：[1]上海交通大学核科学与工程学院,上海200240

出　　处：《原子能科学技术》2014年第11期1992-1997,共6页Atomic Energy Science and Technology

摘　　要：核反应堆控制棒驱动机构(CRDM)是反应堆关键的安全设备,担负着反应堆的启动、功率调节和安全停堆等重要功能。为保证CRDM在运行工况下的温度,本文对某一型号CRDM轴向传热特性进行试验和理论分析。通过试验,测量磁轭线圈位置处驱动杆内壁温并建立试验系统加热功率与冷却风速的关系,获得了保证磁轭线圈正常工作的最小风速以及最小散热量。通过理论分析,建立了CRDM行程壳体内部热虹吸现象的传热模型,模型计算结果与试验结果吻合良好。The control rod drive mechanism （CRDM ） is an important equipment of the nuclear power plant reactor ,taking on functions such as reactor startup ,power regula‐ting and safe shutdow n .In order to ensure the operating conditions of the CRDM ,the axial heat transfer experimental and theoretical analyses were carried out .Based on ex‐periments ,the inner wall temperature of the driving rod at the height of the coils was measured and the relationship betw een the heating pow er and air cooling velocity w as established .In addition ,the minimum air cooling velocity and the corresponding heat loss were obtained .Based on the theoretical analysis ,a heat transfer model was estab‐lished .The simulation results show good agreement with the experimental data .

关 键 词：控制棒驱动机构 轴向传热 试验研究 热虹吸传热模型 

分 类 号：TL364[核科学技术—核技术及应用]