基于CFD的脱硫浆液离心泵密封口环流道优化改造  

A modified transformation of circulation road of slurry pump seal with conical sealing wearings based on CFD

作　　者：陈亚威[1] 梁双印[1] 张兴文[1] 熊心[1] 佟连尧 

机构地区：[1]华北电力大学能源动力与机械工程学院,北京102206

出　　处：《热力发电》2014年第11期120-125,共6页Thermal Power Generation

摘　　要：某电厂600 MW机组用KWPKC 600-800型离心式脱硫浆液循环泵为锥形密封口环,在运行过程中出现较为剧烈且规律性的振动,影响了脱硫系统的正常运行。为此,运用CFD分析法计算得出泵内两相流流场的速度分布及压力分布,并对叶轮口环进行了加装挡流平台和改变密封流道的改造。改造后,对口环间隙分别为3、6mm的泵内流场进行数值模拟。结果表明,改造后泄流对入口流道处所形成的高压屏障处压力有所减小,噪声、振动明显减弱。The 600-800 type centrifugal desulfurization slurry cycling pump in a 600 MW unit applies conical sealing rings,which had intense and regular vibrations during work,affecting normal operation of the des-ulfurization system.Therefore,the CFD software was adopted to simulate the velocity distribution and pressure distribution of the two-phase flow in the pumps.Moreover,the impeller wearing ring was retrofit-ted by installing a buffle plat.After the transformation,numerical simulation on flow field inside the pump was carried out,with the ring gap of 3 mm and 6 mm,respectively.The results show that,the vibration of the slurry pump operation reduced dramatically.

关 键 词：离心泵 密封口环流道 CFD 脱硫浆液 固液两相流 数值模拟 

分 类 号：TM621.7[电气工程—电力系统及自动化]