电流密度对铝电解NiFe_2O_4基金属陶瓷惰性阳极腐蚀的影响  

Effect of current density on corrosion of NiFe_2O_4 based cermet inert anode for aluminum electrolysis

作　　者：田忠良[1] 张腾[1] 魏琛娟[1] 赖延清[1] 李劼[1] 

机构地区：[1]中南大学冶金与环境学院,长沙410083

出　　处：《中国有色金属学报》2014年第9期2360-2365,共6页The Chinese Journal of Nonferrous Metals

基　　金：国家自然科学基金资助项目(51222403);国家高技术研究发展计划资助项目(2008AA030503)

摘　　要：在Na3AlF6-K3AlF6-AlF3-Al2O 3熔体中,研究电流密度对22(Ni+Cu)/(NiFe2O4-10NiO)金属陶瓷惰性阳极腐蚀速率的影响,并分析腐蚀后阳极的微观结构。结果表明,随着电流密度的升高,NiFe2O4基金属陶瓷惰性阳极腐蚀从以化学溶解腐蚀为主逐渐转变为以电化学腐蚀为主,腐蚀率先降低而后增大。当电流密度从1.0 A/cm2增大至1.6 A/cm2时,阳极年腐蚀率从1.22 cm/a降低至0.137 cm/a;进一步提高电流密度至4.0 A/cm2时,阳极年腐蚀率增大到4.96 cm/a。The effect of the current density on the corrosion rate of 22（Ni＋Cu）/（NiFe2O4-10NiO） cermet inert anode in Na3AlF6-K3AlF6-AlF3-Al2O 3 melt was studied, and the microstructure of the inert anode tested was also analyzed. The results indicate that with the increase of current density, the factor which is mainly in charge of the corrosion rate of NiFe2O4 based cermet is changed from the chemical dissolution to the electrochemical corrosion, the corrosion rate of anode decreases first and then increases. When the current density increases from 1.0 A/cm^2 to 1.6 A/cm^2, the yearly corrosion rate decreases from 1.22 cm/a to 0.137 cm/a, but when the current density increases further, such as up to 4.0 A/cm^2, the yearly corrosion rate increases to 4.96 cm/a.

关 键 词：铝电解 惰性阳极 NiFe2O4基金属陶瓷 电流密度 腐蚀 

分 类 号：TF821[冶金工程—有色金属冶金]