检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:沈朝勇[1] 马玉宏[1] 黄襄云[1] 陈洋洋[1] 刘杨[1] 林佳[1]
机构地区:[1]广州大学工程抗震研究中心,广东广州510405
出 处:《广州大学学报(自然科学版)》2014年第5期46-55,共10页Journal of Guangzhou University:Natural Science Edition
基 金:National Basic Research Program of China(973 2011CB013606);the Twelfth-Five National Support Plan Projects(2012BAJ07B02);National Basic Research Program of China(973 2012CB723304);National Union Fund of China(1334209)
摘 要:研究具有高G值的超高阻尼隔震橡胶支座(SHDR)水平性能竖向压力相关性的影响因素.采用反复加载的试验方法,测试了SHDR在不同竖向压应力下的不同力学性能指标,包括等效刚度、等效阻尼比、屈服前刚度、屈服强度及单圈滞回环面积等.在研究测试中,适时改变了试验的外在及内在条件,包括水平加载频率、加载顺序、剪应变、温度及不同内部橡胶G值,以研究其对相关性的影响.研究表明:水平加载频率、剪应变及内部橡胶G值对其相关性影响很小,但竖向压应力的加载顺序、温度对其有一定程度的影响.给出了在普通试验条件下的一些SHDR参数指标的压力相关性的拟合经验公式.The intention of this paper is to investigate some affecting factors on the vertical pressure dependency of the horizontal property of SHDR with high G value .The cyclic loading method was adopted , a series of tests were performed .Different mechanical properties of SHDR were tested under different vertical pressures , which include equivalent stiffness , equivalent damping ratio , post-yielded stiffness , the yield strength and area of sin-gle hysteresis loop .In those tests, different external and internal factors effect were researched , such as fre-quencies of loading , shear strain , sequence of loading , temperatures and G values of inner rubber .Test results show that the effect of frequency of loading , shear strain and G value of inner rubber are very little , but there is a little effect of sequence of loading and temperature on the vertical pressure dependency of SHDR with high G value.Some fitted formulas are given under the general test condition .
关 键 词:竖向压力相关性 超高阻尼隔震橡胶支座 高G值 影响因素
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229