基于ZigBee的智能家居控制系统设计  

Design of smart home control system based on ZigBee

作　　者：陶在红[1,2] 杨宇[1] 常建华[1,2] 

机构地区：[1]南京信息工程大学电子与信息工程学院,江苏南京210044 [2]南京信息工程大学江苏省气象探测与信息处理重点实验室,江苏南京210044

出　　处：《现代电子技术》2014年第23期9-12,共4页Modern Electronics Technique

基　　金：国家自然科学基金资助项目(41075026)

摘　　要：设计了一个新颖的智能家居控制系统,该系统以CC2530无线单片机为主控,采用ZigBee无线传输技术实现上下位机的通信。下位机通过各类传感器获得家中的温度、湿度及电器工作状态信息等参数,并传送给上位机;上位机接收到信息并进行分析,把控制信号下达给继电器控制模块控制电器通断。同时,上位机还能将接收到的数据通过串口传输到PC进行显示和保存。经实际测试,该系统可以快速、准确地实现温湿度测量和家用电器的监视和控制,具有低成本、高实用性的特点。A new smart home control system is designed in this paper. In this system,CC2530 is used as the master control chip,and the communication between a master machine and a slave machine is realized through ZigBee wireless technology. The slave machine gathers indoor parameters on temperature,humidity and work condition of household appliances by various kinds of sensors,and sends them to the master machine. The master machine analyzes the data from slave machine and turns electrical appliances on or off by issuing a control signal to the relay control module. Furthermore,the data from slave machine can be transmitted through a serial port to PC for storage and display. The practical test indicates that the system can realize fast detection of temperature and humidity,as well as monitoring and control of household appliances. This system with lowcost and highpracticality has good promotional value.

关 键 词：ZIGBEE CC2530 智能家居 无线通信 

分 类 号：TN911.34[电子电信—通信与信息系统] TH811.2[电子电信—信息与通信工程]