高水柔模充填液压支架的应用  

Application of High-water Flexible Formwork Powered Support for Stowing

作　　者：程骏[1] 

机构地区：[1]天地科技股份有限公司开采设计事业部,北京100013

出　　处：《煤矿机械》2014年第11期217-219,共3页Coal Mine Machinery

基　　金：中国煤炭科工集团科技创新基金(2011MS014)

摘　　要：介绍榆阳煤矿ZC8000/25/38型高水柔模充填液压支架的工作原理与结构特点。现场使用结果表明,风积砂高水膨胀材料充填采空区后,工作面顶板压力整体较小,没有明显的周期来压现象,地表最大下沉量仅55 mm,地表发生的水平变形、倾斜变形等值远小于建筑物损坏等级Ⅰ级的变形限值。Describes the working principle and structure characteristics of ZC8000/25/38 high-water flexible formwork powered support for stowing. The results showed that the use of the site after the filling of the high water swelling material mixed with the eolian sand, there is no obvious pressure on the roof. The maximum surface subsidence is only 55 mm. The horizontal surface deformation and the tilt deformation are far less than the equivalent deformation limit.

关 键 词：高水柔模 顶板压力 周期来压 充填支架 

分 类 号：TD355[矿业工程—矿井建设]