加速度传感器壳体结构参数优化  

Shell structural parameter optimization of acceleration sensor

作　　者：褚雷阳 于德润 刘宝伟[2] 丁钟凯[2] 符兴宇 

机构地区：[1]二炮驻哈尔滨地区军事代表室,黑龙江哈尔滨150001 [2]中国电子科技集团公司第四十九研究所,黑龙江哈尔滨150001 [3]哈尔滨工业大学,黑龙江哈尔滨150001

出　　处：《传感器与微系统》2014年第12期13-16,共4页Transducer and Microsystem Technologies

摘　　要：合理的结构参数组合可提高加速度传感器壳体结构的固有频率,保证传感器在振动环境下输出信号稳定。通过建立竖直薄板力学模型,确定影响加速度传感器壳体固有频率的结构因素。基于响应面法思想,利用试验设计的方法,以加速度传感器壳体固有频率为指标,各结构参数为因素,设计二次回归正交旋转组合试验。通过ABAQUS6.10软件建立各组试验结构参数组合下的分析模型并提取固有频率,最终确定使固有频率维持在较高水平的结构参数组合区间。通过对优化后参数进行验证性试验,表明优化后区间随机结构参数组合下加速度传感器壳体固有频率能够达到10 kHz以上。Reasonable structural parameter combination can improve natural frequency of shell structure of acceleration sensor, ensure output signal stable in vibration environments. Through building mechanical model for vertical plate to determine structural factors which impact natural frequency of acceleration sensor shell. Based on idea of response surface method, use design of experiment （ DOE ） methods, use natural frequency of acceleration sensor shell as an index and use each structural parameter as factor to design the quadratic regression orthogonal rotation combination experiment. Structural parameters of each group of test combined analysis model is set up by using ABAQUS 6.10 software and extract natural frequency, finally determine structural parameter combinations interval which makes natural frequency maintain at a higher level. Through confirmatory test on optimized parameters, the results show that natural frequency of acceleration sensor shell after optimizing interval of random structural parameter combinations can reach above 10 kHz.

关 键 词：加速度传感器 结构参数 试验设计 固有频率 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]