光伏提水工程中光伏功率和水泵功率的优化匹配  

Photovoltaic power and pump power in a photovoltaic pumping engineering

作　　者：屈盛[1,2] 刘祖明[3,2] 李杰慧 马逊[3] 马雄韬[1] 王玉林[1] 

机构地区：[1]云南民族大学电气信息工程学院,云南昆明650500 [2]云南卓业能源有限公司,云南昆明650217 [3]云南师范大学太阳能研究所,云南昆明650500

出　　处：《云南民族大学学报（自然科学版）》2014年第6期465-468,共4页Journal of Yunnan Minzu University:Natural Sciences Edition

基　　金：国家自然科学基金(51367019)

摘　　要：为了能够优化配置光伏提水工程中的光伏功率和水泵功率,分析了控制逆变器的转换效率、导线带来的损失、光伏阵列的实际最大输出功率等影响因素,推算出在云南省绝大部分地区光伏功率和水泵功率之比的优化取值范围应在1.3 ～1.6之间.对一个功率比为1.3左右的光伏提水工程的测量表明,在晴天中午时分,该工程的水泵工作在其额定功率的90％左右,验证了该优化取值范围是有效的.In order to optimally configure photovoltaic power and pump power in a photovoltaic pumping engineer- ing, the impact factors of photovohaic pump systems are analyzedin detail in this paper, including the efficiency of control inverters, the wire - induced loss and the real maximum output power of photovoltaic arrays, then a deduc- tion is made that the optimum value of the ratio of photovohaic power to pump power in a photovoltaic pumping sys- tem should be between 1.3 and 1.6 in most areas of Yunnan province. Measurement results indicate that at noon of a fine day, the pump works at 90 percent of its rated power in a photovoltaic pumping engineering with a power rati- o of 1.3. This proves the optimum value of the power ratio is effective.

关 键 词：光伏水泵 光伏提水工程 功率匹配 

分 类 号：TK51[动力工程及工程热物理—热能工程]