某金矿浮选工艺流程试验研究  

Experimental Study on Flotation Process of a Gold Ore

作　　者：邵伟华[1,2] 郭珍旭[1,2] 张艳娇[1,2] 常学勇[1,2] 

机构地区：[1]中国地质科学院郑州矿产综合利用研究所,郑州450006 [2]国土资源部多金属矿评价与综合利用重点实验室,郑州450006

出　　处：《有色金属（选矿部分）》2014年第6期28-32,共5页Nonferrous Metals（Mineral Processing Section）

摘　　要：根据某金矿中金以细粒、微细粒赋存于黄铁矿中的特点,试验对比了粗精矿再磨、粗精矿再磨—中矿分级再磨以及强化粗选—中矿分级再磨的三种工艺方案,试验结果表明:保持原磨矿系统不变的条件下,采用粗选添加硫酸强化粗选—中矿分级再磨,再磨细度为-45μm占75%的工艺流程,获得了精矿金品位41.60 g/t、回收率82.61%的选别指标,试验指标较好,工艺流程稳定可行。According to the characteristics of a gold ore, that gold exists in the pyrite with fine particle and micro-fine particle, three process schemes were compared by rough concentrate regrinding,rough concentrate regrinding and middlings classification regrinding respectively, process.The results show,keeping the original grinding system under the same conditions, the satisfactory index of the gold concentrate with gold grade of 41.60 g/t and recovery of 82.61% was achieved under the roughing additions of sulfuric acid and strengthen the roughing and middlings classification regrinding, regrinding fineness-45μm 75% of the process. The process is stable and feasible.

关 键 词：金矿 再磨 工艺流程 

分 类 号：TD953[矿业工程—选矿] TD923