基于ANSYS WORKBENCH的提升机主轴结构优化  

Structure Optimization of Main Shaft Based on ANSYS WORKBENCH

作　　者：葛建兵[1,2] 张鹏[2] 梁开谧 罗丞相 吴水源[2] 

机构地区：[1]石河子大学,新疆石河子832000 [2]重庆大学,重庆400044 [3]重庆泰丰矿山机器有限公司,重庆400042

出　　处：《煤矿机械》2014年第12期56-57,共2页Coal Mine Machinery

基　　金：国家重点基础研究发展计划973计划(2014CB049403)

摘　　要：在建立某型号单绳缠绕提升机的主轴有限元模型基础上,用ANSYS WORKBENCH分析主轴的应力应变分布,在此基础上,对其主轴的径向尺寸进行优化。优化结果确保了其在正常工况下安全运行,又提高经济效益。A parameterized FEA model of mine hoist main shaft was established in ANSYS WORKBENCH. Choosing the weight of spindle as the optimizing target,The stress distribution law and deformation of the main shaft in normal load was analyzed. and analysis on the optimized data was made. The result meets various performance of the mine hoist main shaft.

关 键 词：主轴 结构优化 ANSYS WORKBENCH 

分 类 号：TD534[矿业工程—矿山机电]