检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西北工业大学自动化学院,陕西西安710129
出 处:《电子设计工程》2014年第23期128-131,共4页Electronic Design Engineering
摘 要:导线是飞机电源系统电能传输的主要载体。由于邻近效应,并排敷设相邻导线的电流有效值、频率等因素会影响导线阻抗值发生变化。为确定由于邻近效应引起的导线阻抗参数的变化,利用仿真软件Maxwell 2D/Simplorer建立并排敷设导线仿真模型,分析在邻近导线电流有效值、频率变化时,被测导线电阻、电感的变化规律,并对引起阻抗变化的原因进行了分析。结果表明:由于邻近效应和趋肤效应,被测导线的电阻值会随邻近导线电流频率和有效值的增大而增大;被测导线的电感值随邻近导线电流有效值的增大而增大,随邻近导线电流频率的增大而减小;在相同频率下,并排敷设时被测导线电阻、电感比单根敷设时大。The wire is the main carrier of aircraft power supply system power transmission. Due to the proximity effect, adjacent wires laying side by side ,current amplitude, frequency and so on ,will affect the impedance value.In order to determine the changes of impedance parameters caused by the proximity effect,using simulation software Maxwell 2D/Simplorer set up parallel wires simulation model,analyze the variation of the measured conductor resistance, inductance with the change of adjacent conductor current amplitude, frequency,and analyze the causes of impedence change.The results show that:Due to its proximity effect and skin effect,the measured wire resistance increases with the increasing of the adjacent conductor's current frequency and effective value;the measured wire inductance increases with the increasing of the adjacent conductor's current effective value, decreases with the increasing of the adjacent conductor’s current frequency;the measured wire,laying side by side,resistance and inductance is larger than the measured wire laying signal.
关 键 词:有限元分析 阻抗特性 趋肤效应 临近效应 导线建模
分 类 号:TP391.9[自动化与计算机技术—计算机应用技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.17.70.182