铝板带轧制过程有限元仿真和板形分析  

Aluminum Rolling Finite Element Simulation and Shape Analysis

作　　者：李滔[1] 刘玉梅[1] 李芳 

机构地区：[1]邵阳学院机械与能源工程系,湖南邵阳422000 [2]洞口县一中,湖南邵阳422300

出　　处：《邵阳学院学报（自然科学版）》2014年第4期29-35,共7页Journal of Shaoyang University：Natural Science Edition

摘　　要：随着中国工业的不断发展,铝板带的使用越来越广泛,同时对铝板带的板形精度要求也越来越高.板形影响因素众多,为了更好的分析板形,本文采用有限元仿真的方法对铝板带轧制过程进行仿真分析,通过有限元模型建立和板带轧制过程的仿真计算结果与实测值对比和改变仿真模型中各轧制参数得到不同的板形计算结果,分析了各参数对板形的影响规律.为更进一步指导铝板带轧制生产过程和提高板形精度具有较好的理论基础.With the continuous development of Chinese industry,more and more extensive use of aluminum and the accuracy of the plate-shaped aluminum strip requirements are getting higher and higher. Flatness influenced by many factors,in order to better analyze the plate-shaped,the finite element simulation method for aluminum strip rolling process simulation analysis is used. It compared the simulation and finite element model of strip rolling process results with the measured values,and changed the simulation model parameters to get different each rolling flatness calculation results,analyzed the influence of each parameter on the plate-shaped. To further guide the aluminum strip rolling production process and improve the accuracy of plate-shaped with a better theoretical foundation.

关 键 词：铝板带 板形 轧制 有限元仿真 

分 类 号：TG339[金属学及工艺—金属压力加工]