瓶盖垫片冲塞机的设计与研究  

Design and Research of Machine for Blanking and Filling Paper Pad into Bottle Cap

作　　者：黄晋[1] 刘楚辉[1] 徐乐[1] 夏琳[1] 彭姣娇 

机构地区：[1]嘉兴学院机电工程学院,浙江嘉兴314000

出　　处：《机电工程技术》2014年第12期47-50,189,共5页Mechanical & Electrical Engineering Technology

基　　金：2014年浙江省大学生科技创新活动计划暨新苗人才计划资助项目(2014R417011)

摘　　要：针对现有瓶盖垫片冲塞机所存在的生产能力不足的问题,提出一种新的设计方案。采用传送带取代传统的振动送料盘送盖,以大大提高理盖速度并降低噪声。利用盖口朝向不同的瓶盖重心位置上的差异进行瓶盖筛选,剔除盖口朝向不满足要求的瓶盖,方法简单而有效。将瓶盖垫片的冲裁和填塞进行合并,缩短了工序,可显著提高生产效率。通过更换不同型号的冲裁模、转盘和推杆,并调节送盖滑道两侧夹板的间距就能适应不同规格瓶盖的要求,为实现瓶盖的高速全自动生产奠定了基础。Aim to the inefficiency of production which medicine bottle cap paper pad washing exists,a new design scheme is put forward. This project adopts the conveyor belt to replace the traditional vibration feeding plate to send cap that greatly enhances the speed of cap sorting as well as reduces noise. It takes advantages of the difference of cap center of gravity position because of caps mouth towards different direction and gets rid of the caps whose mouths’ direction cannot meet the requirements. This approach is quite easy and effective. In addition, combing blanking and tamping of cap gasket shorten the process and improve the efficiency of production significantly. What’ s more, it can adapt to different caps of specification requirement by means of replacement of blanking die, turntable and push rod of different models and adjust to distance between slides to send cap on both sides of the plywood. It lays a solid foundation for the realization of high speed and automatic production of caps.

关 键 词：理盖 重力选盖 送盖 垫片冲塞 

分 类 号：TB486[一般工业技术—包装工程]