9m×36m天线安装测量技术研究  

Research on Installation Measurement of a 9 m×36 m Antenna

作　　者：冯其强[1] 金超[2] 李宗春[1] 

机构地区：[1]信息工程大学,河南郑州450052 [2]中国电子科技集团公司第五十四研究所,河北石家庄050081

出　　处：《无线电工程》2015年第1期58-60,共3页Radio Engineering

摘　　要：针对9 m×36 m天线的安装测量,综合运用GPS、全站仪、双经纬仪和工业摄影测量等多种技术手段,圆满完成了天线的指向和面型调整测量。采用GPS技术获取大地方位角,采用全站仪建立施工控制网,采用双经纬仪测量系统指导天线背架及面板放样,采用工业摄影测量系统对天线面型进行精确调整。天线指向精度达到0.016°,面型精度为0.304 mm,达到了设计要求。The installation measurement of a 9 m×36 m antenna is introduced in the paper.Both the direction and planeare adjus.ted according to the measurement data of GPS,total station instrument,double.theodolite and industrial photogrammetry.The geodetic azimuth of the antenna is acquired through GPS.The construction control network is built by total station instrument.The frame and pan.els of the antenna are laid out through double.theodolite system.Industrial photogrammetry system is used to adjust the panels of the an.tenna precisely.The final accuracies of the direction and plane of the antenna are 0. 016＆#176; and 0. 304 mm respectively, meeting the design requirements.

关 键 词：抛物环面天线 指向精度 面型精度 摄影测量 

分 类 号：TN820.5[电子电信—信息与通信工程]