绣花商标用夜光纤维的光效对比分析  

Comparative analysis on lighting efficiency of luminous fibers for embroidery trademark

作　　者：李婧[1] 朱亚楠[1] 陈志[1] 晋阳[1] 葛明桥[1] 

机构地区：[1]生态纺织教育部重点实验室(江南大学),江苏无锡214122

出　　处：《纺织学报》2015年第1期77-81,92,共6页Journal of Textile Research

基　　金：国家自然科学基金资助项目(21171074/B010201);江苏省教育厅稀土夜光纤维及制品的产业化技术项目(JH10-29)

摘　　要：绣花商标使用夜光纤维能在无光照时发光的特性,增加了商标夜间识别的功能。根据威尔克姆制版软件和富仪电脑绣花机设计绣制了4款夜光商标,并对这4款绣花商标用纤维的余辉亮度和光色进行测试和对比分析,得出纤维色彩对夜光纤维在夜间发光的亮度有直接的影响,各色彩在夜光纤维无光照条件下的光色相似,商标上呈现出纤维材料的黄绿色光。与传统刺绣手法相比,采用叠加手法绣制的商标,余辉亮度和辐亮度较大,光色变化不大,但色纯度有所下降,因此,用白色纤维绣制的商标亮度最大,显色性能最好,选择白色夜光纤维绣制商标为好。The embroidered trademark made by luminous fiber has the characteristics of emitting light in the absence of light,which increases the identification capability of the trademark on the night.Four different types of luminous trademarks were designed using the Wilcom plate software and Fuyi computeraided embroidery machine.The afterglow brightness and light color of these trademarks were compared.This research showed that the color of the fiber has a direct effect on the light brightness of luminous fiber on the night.Without the light,each light color of colored luminous fibers is similar,and the luminous fiber emits the yellow-green light.In comparison with traditional embroidery,the trademark made by the overplayed skill has stronger afterglow brightness and radiance and little light color change,but the color purity declined.Thus,the trademark made by white color fiber has maximum brightness,and the best color performance.Therefore,it is optimum to choose white luminous fibers for embroidering trademark.

关 键 词：夜光纤维 电脑刺绣 余辉亮度 光色 光效 

分 类 号：TS151[轻工技术与工程—纺织材料与纺织品设计]