PROTOS-M8卷烟机PROFIBUS-DP网络闪断现象的分析与改进  

PROTOS-M8 cigarette machine PROFIBUS-DP network flash phenomenon Analysis and Improvement

作　　者：李钰靓[1] 徐玉中[1] 张利宏[1] 

机构地区：[1]浙江中烟工业有限责任公司杭州卷烟厂,浙江杭州310024

出　　处：《自动化与仪器仪表》2014年第11期155-156,共2页Automation & Instrumentation

摘　　要：为解决PROTOS-M8卷烟机运行过程中存在的MAX控制段PROFIBUS-DP网络闪断现象而导致设备停机的问题,对MAX控制段的PROFIBUS-DP网络进行了改进。检查PROFIBUS-DP通讯网络电缆屏蔽和走向,保证"接地性"和相互不干扰;利用PROFITRACE工具包进行总线通讯电缆检查,更换电压不足的节点的PROFIBUS-DP连接器;检查Festo阀岛子站,对安装不规范的阀岛子站模块进行改进。应用效果表明,改进后的PROTOS-M8 MAX控制段运行稳定,PROFIBUS-DP总线网络闪断次数由平均3次/周下降到了0次/周,彻底消除了故障原因,提高了设备运行效率,满足了生产组织的要求。Equipment downtime caused problems for the settlement of PROTOS-M8 cigarette machine operation process of MAX segment of PROFIBUS-DP network flash phenomenon of control, MAX control of the PROFIBUS-DP network was im- proved. Check the PROFIBUS-DP communication network cable shielding and trend, ensure ＂grounding＂ and do not interfere with each other; bus communication cable check using the PROFITRACE toolkit, the PROFIBUS-DP connector to replace the node volt- age is insufficient; check the Festo Shima Ko station, improvement module on the island valve installed non-standard station. The ap- plication results show that the PROTOS-M8 MAX control period of stable operation of the improved PROFIBUS-DP bus network flash off times by an average of 3 times per week had fallen to 0 times / week, completely eliminating the fault reason, improve equipment operating efficiency, to meet the requirements of production organization.

关 键 词：PROTOS-M8 PROFIBUS-DP 闪断 MAX控制段 

分 类 号：TP27[自动化与计算机技术—检测技术与自动化装置]