硬质与超硬涂层在印制电路板微型刀具上的应用(二)——硬质硬质HCN涂层在微型铣刀上的应用  

Application of hard and super hard coating on micro-tools for printed circuit boards:Ⅱhard HCN coating on micro-routers

作　　者：陈成 屈建国 张贺勇 骆金龙 罗春峰 

机构地区：[1]深圳市金洲精工科技股份有限公司,广东深圳518116

出　　处：《印制电路信息》2014年第11期36-38,58,共4页Printed Circuit Information

摘　　要：通过物理气相沉积方法,在硬质合金铣刀上沉积硬质HCN涂层,采用硬度仪和划痕仪分析硬质HCN涂层的力学性能,并对比硬质HCN涂层铣刀与未涂层铣刀加工印制电路板材的性能。实验结果表明,硬质HCN涂层的硬度高,与硬质合金基材结合力佳,涂层的摩擦系数低;实验中硬质HCN涂层铣刀加工印制电路板时,使用寿命是未涂层铣刀的2.7倍。Hard HCN coating was deposited on tungsten carbide routers by physical vapor deposition. Indentation tester and scratch tester are performed to characterize the mechanical properties, and a comparative cutting test between HCN coated routers and uncoated routers has been done. The results show that the hardness and elastic modulus of hard HCN coating and the adhesion with substrate are very gold. It is also found that the service life of HCN coated routers is 2.7 times than uncoated routers when cutting printed circuit boards.

关 键 词：硬质HCN涂层 印制电路板 硬质合金铣刀 

分 类 号：TN41[电子电信—微电子学与固体电子学]