低氧TZM合金研究进展  

Progress of Low Oxygen TZM Molybdenum Alloy

作　　者：于志涛[1] 王快社[1] 胡平[1] 杨帆[1] 谭江飞 何欢承[1] 康轩齐 王华[3] 

机构地区：[1]西安建筑科技大学冶金工程学院,西安710055 [2]西安泰金工业电化学技术有限公司,西安710200 [3]西安电炉研究所有限公司,西安710061

出　　处：《材料导报》2015年第1期92-98,116,共8页Materials Reports

基　　金：陕西省重大科技创新项目(S2011ZK1087);西部材料创新基金(XBCL-1-06);西安建筑科技大学创新团队项目;陕西省教育厅产业化项目(2011JG11);陕西省科技统筹创新工程计划项目(2014KTCQ01-35)

摘　　要：钼合金作为一种高温结构材料、功能材料,被广泛应用于冶金工业、航空航天、核工业等诸多领域。近年来,随着相关行业的技术升级,钼合金凭借特有的优势,其应用范围也不断扩大。同时,对钼合金的使用性能也提出了更高的要求。尤其是有色金属、医疗器械材料等加工行业已明确提出对钼合金材料中氧含量的技术要求。详细介绍了目前国内外TZM钼合金低氧制备技术的研究现状,分析了TZM钼合金中氧的来源,明确了钼合金制备过程中起氧化作用的主要因素,讨论了烧结过程中氧含量的变化以及料层厚度对氧含量的影响规律,总结出目前国内外TZM钼合金低氧制备的关键技术。在此基础上,对现在国内外TZM钼合金低氧制备技术的研究未涉及且还需完善之处提出补充意见,并展望了低氧TZM钼合金制备技术的发展前景。Molybdenum alloys are widely used as a kind of high-temperature structural material and function material in many areas such as metallurgical industry,aerospace,nuclear industry.With the development of relevant technology,molybdenum alloys applied range increased.While,higher usability requirement to molybdenum alloys appeared.The technical requirement of oxygen content in molybdenum alloy has been presented clearly in non-ferrous metals industry,medical apparatus and instruments process industry.The domestic and overseas research status of low oxygen preparation technology of the TZM molybdenum alloy,and the source of oxygen from the TZM molybdenum alloy are introduced.The major factor lead to oxidation in the processing of molybdenum preparation,oxygen content change and the effect of material thickness on oxygen content are discussed.The key technologies on low content molybdenum alloy preparation are summarized.Base on above analysis,additional comments about low oxygen content molybdenum preparation technology which did not involve in previous study and need improving are introduced.And its development prospect is put forward.

关 键 词：TZM钼合金 低氧 真空烧结 

分 类 号：TG146.412[一般工业技术—材料科学与工程]