微波交联壳聚糖树脂合成工艺条件对Pb^(2+)吸附量的影响  

Effects of Synthesis Conditions of Microwave Cross-linked Chitosan on Pb^(2+) Adsorption Capacity

作　　者：李俊杰 党明岩[1] 李壮志[1] 刘丽[1] 赵春英[1] 

机构地区：[1]沈阳理工大学环境与化学工程学院,辽宁沈阳110159

出　　处：《电镀与精饰》2015年第1期44-46,共3页Plating & Finishing

基　　金：国家自然科学基金资助项目(No:51004072)

摘　　要：以壳聚糖为原料,合成了微波交联壳聚糖树脂。研究了乳化剂用量、聚乙二醇相对分子质量、交联反应时间等合成工艺条件对树脂及对Pb2+吸附量的影响。结果表明,当以聚乙二醇2000为致孔剂,0.12 g乳化剂,2 m L甲醛,5 m L环氧氯丙烷,交联反应t在20 min时,树脂对Pb2+具有较高的吸附量。Microwave cross-linked chitosan resin was synthesized with chitosan as raw material. Effects of synthesis conditions, such as emulsifier dosage, molecular weight of polyethylene glycol（PEG） , cross-link- ing reaction time, on Pb2＋ adsorption capacity were studied. Results showed that when PEG2000 was used as porogen, emulsifier quality was 0. 12 g, formaldehyde quality was 2 ml, epichlorohydrin quality was 5ml, cross-linking reaction time was 20 min, the resin had better Pb2＋ adsorption capacity.

关 键 词：微波交联壳聚糖 树脂 PB2+ 吸附 

分 类 号：O636[理学—高分子化学]