混凝土碳化问题中渗透性试验方法的研究  

Study on experimental methods of permeability for concrete carbonation

作　　者：邹洪波[1,2] 罗小勇[2] 

机构地区：[1]湖南工程学院建筑工程学院,湖南湘潭411104 [2]中南大学土木工程学院,湖南长沙410083

出　　处：《混凝土》2015年第1期45-47,共3页Concrete

基　　金：国家自然科学基金资助项目(51178470);湖南省教育厅科研资助项目(12C0635)

摘　　要：为用适宜的渗透性试验方法检测混凝土的抗碳化能力，对现有各种混凝土渗透性试验方法进行了分析。指出表面吸水法能用来测量混凝土面层的吸水性，能反应混凝土表层（保护层）的渗透性和混凝土的抗碳化能力。对混凝土表面吸水试验标准进行了研究。指出混凝土试件宜采用100mm×100mm×100mm的立方体，烘干温度宜为60℃，烘干时间宜为72h。混凝土试件的浸水深度以2-5mm为宜，吸水时间以1h为佳，试验温度宜控制在20～25℃。In order to obtain suitably experimental methods of permeability for detecting the concretes anti - carbonation ability, the existing experimental methods were analyzed.It points out the experiment of the surface water absorption can be used to measure the absorbent of the concrete＇s surface layer,which can reflect the concrete＇s.anti -carbonation ability and surface（ protective layer） permeability.The experimental standard of the surface water absorption was established.It is good that the concrete specimens are supposed to be 100 mm× 100 mm × 100 mm cube;the drying temperature is 60℃ and the drying time is 72 h preferably.What＇s more the immersion depth of the concrete specimens is 2-5 mm preferably, water absorption time is 1 h and the test temperature should be controlled at 20-25 ℃.

关 键 词：混凝土 碳化 渗透性 试验方法 

分 类 号：TU528.01[建筑科学—建筑技术科学]