基于FPGA的1553B总线接口设计与验证  

Design and verification of 1553B bus interface based on FPGA

作　　者：泮朋军 朱浩文 

机构地区：[1]上海航天电子技术研究所,上海201109

出　　处：《现代电子技术》2015年第3期26-30,共5页Modern Electronics Technique

摘　　要：为降低成本,提高设计灵活性,提出一种基于FPGA的1553B总线接口方案;采用自顶向下的设计方法,在分析1553B总线接口工作原理和响应流程的基础上,完成了接口方案各FPGA功能模块设计;对关键模块编写VHDL代码,并采用Active-HDL软件进行了仿真;以Virtex-5 FPGA开发板和PC机为验证平台,在FPGA中分别模拟BC与RT,在PC机指令下进行了BC与RT功能模块间的收发测试,结果表明系统能在协议规定的1 MHz数据率下稳定运行;同时,为提升接口性能,采用光纤代替传统电缆传输介质,利用FPGA内嵌Rocket IO内核进行了传统1553协议数据的光纤传输,速率可达3 Gb/s以上。In order to reduce cost and improve design flexibility,a scheme of 1553B bus interface based on FPGA is brought forward in this paper. The design of all FPGA functional modules was completed with the topdown design method by analyzing the working principle and responding flow of 1553B bus interface. The VHDL codes were compiled for the key modules and simulated with ActiveHDL software. BC and RT was simulated in FPGA,and the transmitting and receiving test of BC and RT was conducted through Virtex5 FPGA development board and PC. The results show that the system works stable in 1 Mb/s data rate. To improve interface performance,the traditional transmission cable was replaced by optical fiber. The optical fiber transmission of the traditional 1553B protocol data was realized by embedding RocketIO core into FPGA through instead of copper cable. The data transmission rate is above 3 Gb/s.

关 键 词：1553B总线 接口 现场可编程门阵列 光纤 

分 类 号：TN911-34[电子电信—通信与信息系统] TP334[电子电信—信息与通信工程]