捕收剂丁基铵黑药制备工艺条件的研究  

Study on Technical Conditions of Preparation Ammonium Dibutyl Dithiophosphate as Collector Agent

作　　者：左小华[1] 刘彬[1] 邓祥义[1] 屈媛[1] 高鹏[1] 

机构地区：[1]湖北理工学院化学与材料工程学院,湖北黄石435003

出　　处：《有色金属（选矿部分）》2015年第1期91-94,共4页Nonferrous Metals（Mineral Processing Section）

基　　金：黄石市科技计划项目(2010A10193);湖北理工学院2013年创新人才项目(13xjz02c)

摘　　要：丁基铵黑药是一种较好的硫化铜矿石捕收剂。利用五硫化二磷和丁醇在一定条件下反应,再向其内通入氨气成功制备了丁基铵黑药。考察了工艺条件对制备产品收率的影响,结果表明:当原料五硫化二磷和丁醇质量比为0.75、反应温度为85℃、反应时间1.5 h时,制备的丁基铵黑药产品收率较高。将制备的丁基铵黑药对硫化铜矿进行了浮选试验,可获得铜精矿铜品位23.09%、铜回收率87.73%的较好选铜指标。Ammonium dibutyl dithiophosphate is a Ammonium dibutyl dithiophosphate was successfully prepared collector agent for copper-sulfide ore. reaction between phosphorus pentasulfide and butanol as raw materials, and then the reaction with ammonia. It was investigated that preparation technical conditions influenced on the sample yield. The results showed that the yield of ammonium dibutyl dithiophosphate was higher when mass ratio of phosphorus pentasulfide and butanol was 0.75, the reaction temperature was 85℃ and the reaction time was 1.5 h. Laboratory flotation test on copper sulfide ore was made by preparation ammonium dibutyl dithiophosphate as collector agent. The test results indicated the technical indexes of copper grade was 23.09% Cu with copper recovery of 87.73% in the copper concentrate.

关 键 词：丁基铵黑药 捕收剂 工艺条件 

分 类 号：TD923.1[矿业工程—选矿]