基于UG图形模板的渐开线花键轴滚轧轮参数化设计  

Parametric Design of Rolling Wheel of Involute Spline Shaft Based on UG Graphical Templates

作　　者：王柯智 余小鲁[1] 

机构地区：[1]安徽工程大学机械与汽车工程学院高性能有色金属材料省级重点实验室,安徽芜湖241000

出　　处：《新乡学院学报》2014年第12期42-45,共4页Journal of Xinxiang University

基　　金：安徽省科技计划研究项目(1106c0805011);安徽省高等学校省级自然科学研究项目(KJ2009B134)

摘　　要：运用UG软件对渐开线花键轴滚轧轮进行参数化建模,通过花键轴的参数确定滚轧轮基本参数,将花键轴参数与滚轧轮三维模型关联起来。通过修改花键轴的键数、模数、压力角等参数,建立所需滚轧轮的三维模型,大大提高了设计效率以及设计思路的可重用性。The authors used UG to parametric modeling the rolling wheel of involute spline shaft.The basic parameters of the rolling wheel were determined by the parameters of the spline shaft,then the spline shaft parameters were associated with the 3D model of the rolling wheel.By modifying the keys,modulus,pressure angle and other parameters of spline shaft,three-dimensional model of rolling wheel was obtained,which improves the design efficiency and reusability of design ideas greatly.

关 键 词：花键轴 滚轧轮 UG 参数化设计 

分 类 号：TG332[金属学及工艺—金属压力加工]