盐在水性油墨浮选中的作用  

Effect of salt on water-based ink deinking

作　　者：胡硕[1] 孙广卫[1] 任静[1] 郑杰[1] 李海明[1] 郭延柱[1] 

机构地区：[1]大连工业大学轻工与化学工程学院,辽宁大连116034

出　　处：《大连工业大学学报》2014年第5期333-336,共4页Journal of Dalian Polytechnic University

基　　金：国家自然科学基金资助项目(31000282);辽宁省高等学校优秀人才支持计划项目(LJQ2011053)

摘　　要：采用模拟探究方法,在有纤维和没有纤维存在的水性油墨体系中,研究3种金属离子及其不同使用量下,水性油墨胶体稳定性。结果显示,水性油墨的平均粒径为154.0nm,热不稳定;在2种系统中,3种金属离子对水性油墨胶体稳定性都有显著影响,钙离子、镁离子能使水性油墨粒径增大几十倍,pH略微减小,电导率增加;仅需要1/10的钙离子或镁离子浓度,铝离子就能使水性油墨粒子的粒径增大300倍,pH明显降低。纤维的存在能够稍微增加体系的pH和电导率。电镜照片显示,金属离子的加入可以减少纤维对油墨的吸附。Simulation method was adopted to study the water-based ink stability with different dosage of metal ions in two different simulation systems with or without fibre.Results showed that water-based ink was thermal instability when the average particle size was 154.0nm.Three kinds of metal ions showed significant influence on the stability of the water-based ink gel in the two systems.The water-based ink particle size was increased dozens times,pH was reduced slightly,and conductivity was raised slowly with increasing calcium and magnesium ions in system.The water-based ink size was increased by 300 times and pH was reduced sharply even with one-tenth of calcium or magnesium ions in system.The presentation of fiber could increase slightly pH value and conductivity of the system.The addition of ions could reduce ink adsorption on fibres.

关 键 词：水性油墨 金属离子 纤维吸附 浮选 

分 类 号：TS727.6[轻工技术与工程—制浆造纸工程]