悬浮阴极电化学加工单出口形式下流场的FLUENT仿真分析  

Simulation of electrolyte flow field with one outlet suspended cathode of electrochemical machining based on FLUENT

作　　者：张小恒[1] 庞桂兵[1] 蔡晓[1] 张利萍[1] 赵秀君[1] 郑剑平[2] 王滨 

机构地区：[1]大连工业大学机械工程与自动化学院,辽宁大连116034 [2]中国原子能科学研究院反应堆工程设计研究所,北京102413 [3]大连豪森瑞德设备制造有限公司,辽宁大连116036

出　　处：《大连工业大学学报》2015年第1期68-72,共5页Journal of Dalian Polytechnic University

基　　金：国家自然科学基金资助项目(51275062);辽宁省自然科学基金资助项目(2014026005);"十二五"国家科技支撑计划项目(2013BAD18B09)

摘　　要：利用流体力学分析软件FLUENT对回转件电化学加工悬浮阴极条件下的流场进行三维数值仿真。研究了悬浮阴极的流场及承载特性,以常见的几种出口形式为例,探讨流速变化对电解液流场特性及承载能力的影响规律。模拟结果表明,圆形和十字形出口形式条件下电解液的流动性好,间隙流场中液膜的承载能力强且分布均衡;流速增大时,液膜承载能力增强,更有利于形成稳定间隙。Three dimensional numerical simulation on the flow field was carried out under the condition of the suspended cathode adopted in the rotary parts’ electrochemical machining by FLUENT.Taking several common fluid outlet forms as example,the effect of flow velocity on the flow field characteristic and the bearing ability was studied.The simulation results show that the bearing capacity of the suspended cathode is strong and the distribution of the electrolyte pressure is balanced with the circular and crossing outlet form.The bearing capacity will increases with the increase of the electrolyte velocity,which is helpful to form the stable gap.

关 键 词：悬浮阴极 FLUENT 间隙 电解液出口 

分 类 号：TG175[金属学及工艺—金属表面处理]