MBR+NF/RO工艺处理垃圾渗滤液设计计算  

Design and Calculation of MBR + NF / RO Process for Treatment of Landfill Leachate

作　　者：丁西明[1] 李洪君[2] 李晓尚 孙月驰[1] 张亚琳[1] 汤萌萌[1] 杜昱[1] 

机构地区：[1]中国市政工程华北设计研究总院有限公司,天津300074 [2]国内贸易工程设计研究院,北京100069 [3]中环保水务投资有限公司,北京100022

出　　处：《中国给水排水》2015年第4期72-76,共5页China Water & Wastewater

摘　　要：MBR+NF/RO工艺是垃圾渗滤液处理的主流工艺,具有处理效率高、运行稳定及出水水质优等特点。但是目前国内没有较为完善的标准、规范,在实际工程建设中,大多数设计单位及环保公司均按照各自的经验公式及设计参数进行计算,误差较大。为此,详细给出了该工艺设计中的具体计算公式和设计参数的选择范围,可供设计人员参考。The process of MBR ＋ NF/RO is the mainstream of landfill leachate treatment technology, which has many characteristics, such as high treatment efficiency, stable operation, excellent effluent quality and so on. But there are no perfect domestic standards and specifications in China at present. In the actual project construction, most of the design units and environmental protection companies designed and calculated this process in accordance with the respective empirical formulas and design parameters. There was a large error. Therefore, the selection ranges of the detailed calculation formula and the design parameters were offered to provide reference for designers.

关 键 词：垃圾渗滤液 MBR NF/RO 设计计算 

分 类 号：X703[环境科学与工程—环境工程]