新型太阳能集热装置的二次反射器研究  

Design of secondary reflector in a new type solar collector

作　　者：宋永兴[1] 姜希彤[1] 王君[1] 杜侠鸣 曲燕[1] 

机构地区：[1]中国石油大学(华东)化学工程学院,山东青岛266580

出　　处：《热力发电》2015年第1期49-53,共5页Thermal Power Generation

基　　金：山东省自然科学基金(ZR2011EEQ020);青岛市科技发展计划项目(07-2-3-15-jch);中国石油大学(华东)自主创新科研计划项目(12CX04044A)

摘　　要：基于新型反射塔底式太阳能集热装置的二次反射器结构原理,采用Soltrace软件对椭圆面和双曲面的二次反射器进行模拟分析。结果表明：最优椭圆面二次反射器结构参数f/2a的合理范围为0.63~0.72,最优双曲面二次反射器结构参数2a/f的合理范围为0.60~0.75,双曲面结构参数的合理范围大于椭圆面;在相同焦距及相同光学效果下,双曲面二次反射器所需的塔高明显低于椭圆面。因此,应优先选用双曲面二次反射器。On the basis of the structural principle of secondary reflector in a new type solar collector in beam-down central receiver system,the Soltrace software was employed to perform numerical simulation on the secondary reflector with ellipsoid and hyperboloid.The results show that：the appropriate range of the optimal structural parameters of the ellipsoid secondary reflector 2a/f was between 0.63 and 0.72;that of the optimal structural parameters of the hyperboloid secondary reflector 2a/f was between 0.6and 0.75,which was larger.With the same focal length and optical effect,the tower height the hyperboloid secondary reflector required was obviously lower than that of the ellipsoid secondary reflector.Therefore,the hyperboloid secondary reflector should be chosen first.

关 键 词：太阳能集热装置 反射塔底式 双曲面 椭圆面 二次反射器 定日镜场 最大半径 塔高 

分 类 号：TK512[动力工程及工程热物理—热能工程]