7022铝合金TIG焊接接头性能分析  

Analysis on TIG Welded Joint Properties of 7022 Aluminum Alloy

作　　者：张家威[1] 汪洪峰[1] 朱青青[1] 

机构地区：[1]黄山学院机电工程学院,安徽黄山245041

出　　处：《中国材料科技与设备》2015年第1期23-25,共3页Chinese Materials Science Technology & Equipment

基　　金：国家自然科学基金资助项目（51175255）;安徽省高校优秀青年人才基金重点项目（2013SQRI.089ZD）;国家级大学生创新创业项目（201210375025）

摘　　要：7022铝合金板材焊接形成焊缝区域，其性能与母材有一定的差异，为了更好的掌握焊缝区域性能，本文通过TIG焊对7022铝合金进行焊接并分析其焊缝接头性能。结果显示母材区晶粒粗大，焊缝的晶粒细小．焊缝区域与热影响区有明显的过渡的熔合区；7022铝合金TIG焊接接头抗拉强度仅为母材的15．7％，热影响区的硬度比焊缝区域高,但低于母材区。In the weld region, its properties with the base metal have certain differences. In order to better grasp charac- teristics of weld region, 7022 aluminum alloy was welded by TIG and the properties of the weld joint were analyzed in this pa- per. The results show that the base metal has coarse grains, the weld region has tiny grains, and the obvious transition of fu- sion zone is existed between the weld region and heat affected zone. Tensile strength of 7022 aluminum alloy TIG welded joint was only about 15.7% of the base metal. The hardness in heat affected zone is higher than in the weld region, but below the base metal.

关 键 词：TIG 抗拉强度 金相组织 显微硬度 7022铝合金 

分 类 号：TG404[金属学及工艺—焊接]