基于UG的遥控器上下壳体注塑模设计  

INJECTION MOULD FOR REMOTE SHELLS BASED ON UG

作　　者：谢世坤[1] 郭秀艳[1] 易荣喜[1] 潘晓亮[1] 盛弦洪 

机构地区：[1]井冈山大学机电工程学院,江西吉安343009

出　　处：《井冈山大学学报（自然科学版）》2015年第1期61-64,共4页Journal of Jinggangshan University (Natural Science)

基　　金：国家自然科学基金项目(51165010);江西省科技支撑计划项目(20112BBE50002);江西省高等学校科技落地计划项目(KJLD14066)

摘　　要：介绍以丙烯腈-丁二烯-苯乙烯三种成分组成的共聚物(ABS)为材料制备的遥控器壳体注塑模具设计过程。通过对遥控器壳体塑件的结构及成型工艺分析,提出一模两腔的注塑模具结构,并基于UG8.0软件对注塑模具中各个部件进行了系统的设计,尤其是镶嵌的成型零部件和侧向分型与抽芯机构的设计,实现塑件复杂结构的一次成型,使整套模具结构更加紧凑,提高了生产效益和经济效益。The injection mould design of remote shells made by acrylonitrile-butadiene-styrene（ABS） was introduced. Through the analysis on the whole structures and the forming technology of the remote shells, an injection mould with one module and two cavities was proposed. Based on UG8.0, the different parts of this mould were designed, especially the independent shaping components and the core-pulling mechanism. The mould was compact in structure, meeting the forming of complicated structure and improving the economic benefit.

关 键 词：遥控器 注塑模 UG 侧向分型与抽芯机构 

分 类 号：TG241[金属学及工艺—铸造] TQ320[化学工程—合成树脂塑料工业]