低压STATCOM死区效应补偿方法的研究  

Study on the Compensation Method of Low Voltage STATCOM Dead-time Effect

作　　者：刘振武[1] 孙晋璐[2] 

机构地区：[1]武汉大学电气工程学院,湖北武汉430072 [2]晋煤集团技术研究院,山西晋城048006

出　　处：《电气传动》2015年第2期30-34,共5页Electric Drive

摘　　要：低压静止同步补偿器主电路器件多为三相桥式PWM变流器,由于开关器件的非理想特性以及为避免同一桥臂上、下直通而人为设定的延时会产生死区效应,进而影响系统的补偿性能。在对死区效应产生机理及影响定性、定量分析的基础上,针对传统死区补偿方法需要对输出电流方向检测的不足,提出开关脉冲调整的死区效应补偿方法。通过判断目标电压矢量来获得电流方向,进而调整开关脉冲来实现死区补偿,仿真和实验验证了该方法的有效性。Most of the low voltage static synchronous compensator main circuit component was three-phase full-bridge PWM converter.Since the dead time effect generated by the switching device non-ideal characteristics and theartificially set delay to avoid the same bridge arm switches direct conduction,eventually affected the compensationperformance. Based on the analysis of the mechanism of dead time effect and its influence on dead-time effect. For thetraditional method of dead time compensation′s insufficient which need detecting the direction of output current,a deadtime effect compensation method based on switching pulse adjustment was proposed. Get the current direction bydetermined the target voltage vector,then adjusted the switching pulses to compensate the dead time,simulation andexperiment results verify the effectiveness of the proposed method.

关 键 词：静止同步补偿器 死区效应 开关脉冲调整 补偿方法 

分 类 号：TM714.3[电气工程—电力系统及自动化]