端烯丙基超支化聚醚多元醇的制备及表征  

The Synthesis and Characterization of Allyl-Terminated Hyperbranched Polyether Polyols

作　　者：王光辉[1] 顾尧[1] 朱丙清[1] 

机构地区：[1]青岛科技大学橡塑材料与工程教育部重点实验室,山东青岛266042

出　　处：《聚氨酯工业》2015年第1期22-25,共4页Polyurethane Industry

摘　　要：以三羟乙基异氰脲酸酯(THEIC)为起始剂、自制双金属氰化络合物(DMC)为催化剂、环氧丙烷(PO)与缩水甘油开环聚合制备端羟基超支化聚醚多元醇(HTHP);然后与烯丙基缩水甘油醚(AGE)、PO反应制备端烯丙基超支化聚醚多元醇。讨论了HTHP与PO的质量比(RHTHP/PO)、AGE与PO的质量比(RAGE/PO)、DMC催化剂加入量对聚合反应的影响,采用红外谱图和核磁谱图对产物进行表征。结果表明,增加RHTHP/PO有利于缩短诱导期和聚合反应时间,同时可增加收率;当RAGE/PO为1∶20时,收率最高;DMC催化剂最佳质量分数为200×10-6;表征证实了端羟基超支化聚醚多元醇中成功引入了双键,合成了端烯丙基超支化聚醚多元醇。Hydroxyl-terminated hyperbranched polyether polyols（ HTHP） were prepared by polymerization of propylene oxide（ PO） and glycidol with 1,3,5-tris（ 2-hydroxyethyl） cyanuric acid（ THEIC） as initiator in the presence of double metal cyanide（ DMC） catalyst. Allyl-terminated hyperbranched polyether polyols were synthesized by allyl glycidyl ether（ AGE）,PO and HTHP. The effects of feed ratio of HTHP to PO（ RHTHP / PO） and AGE to PO（ RAGE / PO） and DMC catalyst on the reaction conversion rate were discussed. The products were characterized by infrared spectrum and unclear magnetic spectra. The results showed that the RHTHP / POincreasing would shorten the induction period and polymerization time and increase the yield. When the RAGE / POwas 1 ∶ 20,the yield was the most highest. The best mass friction of DMC was 200 × 10^-6. The test confirmed that HTHP was added to the double bond successfully and allyl-terminated hyperbranched polyether polyols were synthesized.

关 键 词：缩水甘油 端羟基超支化聚醚多元醇 烯丙基缩水甘油醚 端烯丙基超支化聚醚多元醇 

分 类 号：TQ317[化学工程—高聚物工业]