不同结构分散剂对颜料炭黑分散稳定性的影响  

Influences of Dispersants with Different Structures on the Dispersibility of Carbon Black

作　　者：姜东[1] 王朝生[1] 江振林[1] 周炜 张芳 

机构地区：[1]东华大学材料科学与工程学院,上海201620 [2]真彩文具股份有限公司,江苏昆山215343

出　　处：《过程工程学报》2015年第1期153-158,共6页The Chinese Journal of Process Engineering

基　　金：国家支撑计划基金资助项目(编号:2011BAE31B00)

摘　　要：在不同p H值下分析了吸附不同结构分散剂的炭黑MA-100的ζ电势和分散稳定性,考察了炭黑所制色浆配制的中性墨水的存储稳定性和书写性能.结果表明,阴离子型聚合物分散剂聚苯乙烯马来酸酐共聚铵盐(SMA-NH4)对炭黑的稳定效果最好,沉降速率为17μm/min,非离子型高分子分散剂聚乙烯吡咯烷酮次之,沉降速率为30μm/min,阴离子型分散剂亚甲基二萘磺酸钠效果最差,沉降速率为218μm/min.水性分散体系中p H值不仅能改变SMA-NH4的电离程度,而且能改变其聚合物链在炭黑表面的构型,p H值为8时SMA-NH4为炭黑提供的ζ电势最高,为-45.7 m V,使聚合物的分子链段充分舒展,提高了SMA-NH4的空间位阻,其所制色浆配制的中性墨水具有良好的存储稳定性和书写性能.The ζ potential of carbon black MA-100 adsorbed dispersants with different structures and its dispersing stability under different p H values were analyzed, and the storage stability and writing properties of gel ink that was prepared with carbon black paste were studied. The results show that the anionic polymer dispersant ammonium salt of styrene-maleate copolymer（SMA-NH4） has the best dispersing stability to carbon black MA-100 with the sedimentation rate of 17 μm/min, followed by the nonionic dispersant polyvinyl pyrrolidone with 30 μm/min, and the anionic dispersant methylenebis naphthalene sulfonate falls into the last position with 218 μm/min. In aqueous systems, p H value can change not only the ionization degree of SMA-NH4, but also the configuration of polymer chains on the carbon black surface. The ζ potential of carbon black is-45.7 m V at p H value of 8, so the molecular chains of the polymer fully stretch, leading to that improvement of SMA-NH4 steric resistance, the gel ink prepared with this dispersant shows good storage stability and writing properties.

关 键 词：炭黑 分散剂 稳定性 共聚合物 墨水 吸附 

分 类 号：TQ630.6[化学工程—精细化工]