大进给铣削TC21钛合金的刀具磨损试验研究  被引量:10

Experimental Study on Tool Wear in High Feed Milling of Titanium Alloy TC21

在线阅读下载全文

作  者:史琦[1] 李亮[1] 何宁[1] 赵威[1] 

机构地区:[1]南京航空航天大学机电学院

出  处:《航空制造技术》2015年第3期51-53,57,共4页Aeronautical Manufacturing Technology

基  金:国家重大专项课题(2012ZX04003021)

摘  要:对大进给铣削TC21钛合金时的刀具磨损形态进行了宏观和微观分析:由宏观来看,大进给铣刀的前、后刀面磨损不均匀,其磨损严重区域在最大切深附近;由微观来看,大进给铣刀的前、后刀面都有大量的钛合金粘附物、间距不等的热裂纹和刀具材料的剥落出现。Tool wears are studied with macroanalysis and micro-analysis method in high feed milling of titanium alloy TC21.From the macro-analysis,it can be seen that tool wears in rake face and flank face are not uniform and the serious worn area is near the maximum cutting depth.From the micro-analysis,much attached titanium alloy,cracks with different distance between adjacent ones and breakage are found in both faces.

关 键 词:钛合金 大进给 铣削 刀具磨损 

分 类 号:V261.23[航空宇航科学与技术—航空宇航制造工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象